REAR PARKING SENSOR BUZZER INSPECTION
id092200030700
4SD
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION.)
2. Remove the following parts:
- (1) Rear seat cushion (See REAR SEAT CUSHION REMOVAL/INSTALLATION.)
-
- (2) Rear seat back (See REAR SEAT BACK LATCH REMOVAL/INSTALLATION.)
-
- (3) Tire house trim (See TIRE HOUSE TRIM REMOVAL/INSTALLATION.)
-
- (4) C-pillar trim (See C-PILLAR TRIM REMOVAL/INSTALLATION.)
-
- (5) High-mount brake light (See HIGH-MOUNT BRAKE LIGHT REMOVAL/INSTALLATION.)
-
- (6) Rear package trim (See REAR PACKAGE TRIM REMOVAL/INSTALLATION.)
-
- (7) Rear parking sensor buzzer (See REAR PARKING SENSOR BUZZER REMOVAL/INSTALLATION.)
-
3. Verify the continuity between rear parking sensor buzzer terminals A and B.
-
• If not as indicated in the table, replace the rear parking sensor buzzer.
WGN
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION.)
2. Remove the following parts:
- (1) Liftgate upper trim (See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION.)
-
- (2) Liftgate side trim (See LIFTGATE SIDE TRIM REMOVAL/INSTALLATION.)
-
- (3) Liftgate recess (See LIFTGATE RECESS REMOVAL/INSTALLATION.)
-
- (4) Liftgate lower trim (See LIFTGATE LOWER TRIM REMOVAL/INSTALLATION.)
-
- (5) Rear parking sensor buzzer (See REAR PARKING SENSOR BUZZER REMOVAL/INSTALLATION.)
-
3. Verify the continuity between rear parking sensor buzzer terminals A and B.
-
• If not as indicated in the table, replace the rear parking sensor buzzer.
