DTC U2300:56 [ADAPTIVE FRONT LIGHTING SYSTEM (AFS) CONTROL MODULE]
id1502b6027200
|
Description |
Configuration data unmatched with instrument cluster |
|---|---|
|
Detection condition
|
• Configuration data of the AFS control module and instrument cluster are not matched.
|
|
Fail-safe
|
• Control of the AFS is continued.
• Control of the headlight auto leveling system is continued.
|
|
Possible cause
|
• DTCs are stored in the instrument cluster.
• Instrument cluster configuration data error
• AFS control module malfunction
|
|
System wiring diagram
|
Not applicable
|
Diagnostic Procedure
|
Step |
Inspection |
Action |
|
|---|---|---|---|
|
1
|
VERIFY INSTRUMENT CLUSTER DTCs
• Perform the DTC inspection for the instrument cluster using the M-MDS.
• Is the DTC displayed?
|
Yes
|
Repair the malfunctioning part according to the applicable DTC troubleshooting.
|
|
No
|
Go to the next step.
|
||
|
2
|
RESET INSTRUMENT CLUSTER CONFIGURATION DATA
• Using the M-MDS, perform the instrument cluster configuration with the As-Built data.
• Clear the AFS control module DTCs using the M-MDS.
• Switch the ignition ON (engine off or on) and wait for 30 s or more.
• Perform the DTC inspection for the AFS control module using the M-MDS.
• Is the same Pending DTC present?
|
Yes
|
Replace the AFS control module, then go to the next step.
|
|
No
|
Go to the next step.
|
||
|
3
|
VERIFY IF OTHER DTCs DISPLAYED
• Are any other DTCs displayed?
|
Yes
|
Repair the malfunctioning part according to the applicable DTC troubleshooting.
|
|
No
|
DTC troubleshooting completed.
|
||