JOINT SHAFT ASSEMBLY [L3 Turbo]

id0313008011b5

1. Assemble in the order indicated in the table.


1	Bracket
2	Bearing (See Bearing Assembly Note)
3	Snap ring
4	Joint shaft (See Joint Shaft Assembly Note)
5	Dust seal (See Dust Seal Assembly Note)
6	Snap ring

Bearing Assembly Note

1. Install the new bearing to the bracket.

Note

• When the bearing is not installed to the bracket by hand, install it using the SST.

1. Install the joint shaft using a press and the SST.

1. Apply grease to the new dust seal lip.

2. Install the new dust seal using a press and the SST.