JOINT SHAFT ASSEMBLY [MZR-CD (RF Turbo)]

id0313008011j5

1. Assemble in the order indicated in the figure.


1	Bracket
2	Snap ring (outer side)
3	Bearing (See Bearing Assembly Note)
4	Dust seal (differential side) (See Dust Seal (Differential Side) Assembly Note)
5	Joint shaft (See Joint Shaft Assembly Note)
6	Snap ring (inner side)
7	Dust seal (wheel side) (See Dust Seal (Wheel Side) Assembly Note)

Bearing Assembly Note

1. Install the new bearing using the SSTs.

Caution

• Applying excessive force to the bearing could deform the snap ring. Be careful when assembling the bearing.

1. Apply grease to the new dust seal lip.

2. Install the new dust seal (differential side) using a steel plate and the SSTs.

1. Assemble the joint shaft using a press and the SST.

1. Apply grease to the new dust seal lip.

2. Install the new dust seal (wheel side) using the SSTs.