|
Terminal
|
Signal name
|
Connected to
|
Measured condition
|
Voltage (V)/Continuity
|
Inspection item(s)
|
|
1A
|
Trunk lid/liftgate lock control
|
• Trunk lid opener (4SD)
• Liftgate lock actuator (5HB, WGN)
|
Lock actuator locking
|
1.0 or less → B+ → 1.0 or less
|
• Trunk lid opener (4SD)
• Liftgate lock actuator (5HB, WGN)
• Related wiring harnesses
|
|
Other
|
1.0 or less
|
|
1C
|
Trunk lid/liftgate unlock control
|
• Trunk lid opener (4SD)
• Liftgate lock actuator (5HB, WGN)
|
Lock actuator unlocking
|
1.0 or less → B+ → 1.0 or less
|
• Trunk lid opener (4SD)
• Liftgate lock actuator (5HB, WGN)
• Related wiring harnesses
|
|
Other
|
1.0 or less
|
|
1F
|
Door switch signal (LR)
|
Door switch (LR)
|
Door open (LR)
(Door switch on)
|
1.0 or less
|
• Door switch (LR)
• Related wiring harnesses
|
|
Doors closed (LR)
(Door switch off)
|
B+
|
|
1G
|
Headlight leveling (manual) GND
|
Headlight leveling actuator
|
Under any condition: Inspect for continuity to headlight leveling actuator.
|
Continuity detected
|
• Related wiring harnesses
|
|
1I
|
Interior light control
|
• Map light
• Interior light
|
Within 5 min after any door is opened.
|
1.0 or less
|
• Map light
• Interior light
• Related wiring harnesses
|
|
5 min or more after any door is opened.
|
B+
|
|
All doors closed
|
B+
|
|
1K
|
Interior light power supply
|
• Map light
• Interior light
|
Under any condition
|
B+
|
• Map light
• Interior light
• Related wiring harnesses
|
|
1M
|
Brake light power supply
|
Brake light
|
Stop light switch is ON
|
B+
|
• Brake light
• Related wiring harnesses
|
|
Stop light switch is OFF
|
1.0 or less
|
|
1O
|
Back-up light power supply
|
Back-up light
|
Back-up light switch is ON
|
B+
|
• Back-up light
• Related wiring harnesses
|
|
Back-up light switch is OFF
|
1.0 or less
|
|
1P
|
Taillight power supply
|
Taillight
|
TNS switch is ON
|
B+
|
• Taillight
• Related wiring harnesses
|
|
TNS switch is OFF
|
1.0 or less
|
|
2A
|
Fuel level signal 2 output
|
Instrument cluster
|
Under any condition: Inspect for continuity to instrument cluster.
|
Continuity detected
|
• Related wiring harnesses
|
|
2B
|
Fuel level signal 1 output
|
Instrument cluster
|
Under any condition: Inspect for continuity to instrument cluster.
|
Continuity detected
|
• Related wiring harnesses
|
|
2C
|
Woofer signal 1
|
Woofer
|
Under any condition: Inspect for continuity to woofer.
|
Continuity detected
|
• Related wiring harnesses
|
|
2D
|
Rear wiper motor power supply
|
Rear wiper motor
|
Rear wiper switch is ON
|
B+
|
• Rear wiper motor
• Related wiring harnesses
|
|
Rear wiper switch is OFF
|
1.0 or less
|
|
2E
|
Woofer signal 2
|
Woofer
|
Under any condition: Inspect for continuity to woofer.
|
Continuity detected
|
• Related wiring harnesses
|
|
2F
|
• Trunk compartment light signal (4SD)
• cargo compartment light switch signal (5HB, WGN)
|
• Trunk compartment light switch (4SD)
• Cargo compartment light switch (5HB, WGN)
|
Trunk lid/liftgate is open.
(Switch on)
|
1.0 or less
|
• Trunk compartment light switch (4SD)
• Cargo compartment light switch (5HB, WGN)
• Related wiring harnesses
|
|
Trunk lid/liftgate is closed.
(Switch off)
|
B+
|
|
2G
|
Woofer GND
|
GND
|
Under any condition: Inspect for continuity to GND.
|
Continuity detected
|
• Related wiring harnesses
|
|
2H
|
Theft-deterrent siren signal
|
Theft-deterrent siren
|
Theft-deterrent system arming
|
See Fig 1
|
• Theft-deterrent siren
• Related wiring harnesses
|
|
2I
|
Rear turn light (RH) control
|
Rear turn light (RH)
|
Turn switch (RH) is ON
|
Alternates between 1.0 or less and B+
|
• Rear turn light (RH)
• Related wiring harnesses
|
|
Turn switch is OFF
|
1.0 or less
|
|
2J
|
Autostop switch signal
|
Autostop switch
|
Rear wiper moving
|
B+
|
• Autostop switch (rear wiper motor)
• Related wiring harnesses
|
|
Rear wiper stopped
|
1.0 or less
|
|
2K
|
Rear turn light (LH) control
|
Rear turn light (LH)
|
Turn switch (LH) is ON
|
Alternates between 1.0 or less and B+
|
• Rear turn light (LH)
• Related wiring harnesses
|
|
Turn wiper switch is OFF
|
1.0 or less
|
|
2L
|
Trunk lid lock/unlock signal
|
Trunk lid key cylinder switch
|
At the moment key cylinder is unlocked
|
1.0 or less
|
• Trunk lid key cylinder switch
• Related wiring harnesses
|
|
Other
|
B+
|
|
2M
|
Sunroof power supply
|
Sunroof switch
|
Under any condition
|
B+
|
• Sunroof switch
• Battery
|
|
2N
|
Intruder sensor (rear) power supply
|
Intruder sensor (rear)
(WGN only)
|
Theft-deterrent system pre-arming or arming
|
B+
|
• Related wiring harnesses
|
|
Other
|
1.0 or less
|
|
2O
|
Auto leveling control module signal
|
Auto leveling control module
|
Under any condition: Inspect for continuity to auto leveling control module.
|
Continuity detected
|
• Related wiring harnesses
|
|
2P
|
Intruder sensor signal
|
Intruder sensor (rear)
(WGN only)
|
Theft-deterrent system pre-arming, arming, or alarm
|
B+
|
• Intruder sensor (rear)
• Related wiring harnesses
|
|
Intruder sensor detects intrusion
|
B+ → 1.0 or less → B+
|
|
Theft-deterrent system: Other
|
1.0 or less
|
|
3A
|
Power supply
(rear wiper)
|
R.WIP 10 A fuse
|
Ignition switch is ON position.
|
B+
|
• R.WIP 10 A fuse
• Battery
|
|
3B
|
Turn light (RH) signal output
|
Instrument cluster
|
Turn switch (RH) is ON
|
Alternates between 1.0 or less and B+
|
• Related wiring harnesses
|
|
Turn switch is OFF
|
1.0 or less
|
|
3C
|
Rear washer switch signal
|
Rear washer switch
|
Rear washer switch is ON
|
1.0 or less
|
• Rear washer switch
• Related wiring harnesses
|
|
Rear washer switch is OFF
|
B+
|
|
3D
|
Turn light (LH) signal output
|
Instrument cluster
|
Turn switch (LH) is ON
|
Alternates between 1.0 or less and B+
|
• Related wiring harnesses
|
|
Turn switch is OFF
|
1.0 or less
|
|
3E
|
Ignition key illumination control
|
Ignition key illumination
|
Ignition switch off and driver-side door opened.
|
1.0 or less
|
• Ignition key illumination
• Related wiring harnesses
|
|
15 s or more after driver-side door closed.
|
B+
|
|
3F
|
Power supply
|
A/C 10 A fuse
|
Ignition switch is ON position.
|
B+
|
• A/C 10 A fuse
• Battery
|
|
3G
|
Power supply
|
D/L 30 A fuse
|
Under any condition
|
B+
|
• D/L 30 A fuse
• Battery
|
|
3H
|
Headlight leveling (manual) GND
|
Headlight leveling switch
|
Under any condition: Inspect for continuity to headlight leveling switch.
|
Continuity detected
|
• Related wiring harnesses
|
|
3I
|
Power supply
(PAD)
|
PAD indicator light
|
PAD cut-off switch is ON position.
|
B+
|
• R.WIP 10 A fuse
• Battery
|
|
Other
|
1.0 or less
|
|
3J
|
Power supply
|
ROOM 15 A fuse
|
Under any condition
|
B+
|
• ROOM 15 A fuse
• Battery
|
|
3K
|
Back-up light switch signal
|
Car-navigation unit
|
Back-up light switch is ON
|
B+
|
• Related wiring harnesses
|
|
Back-up light switch is OFF
|
1.0 or less
|
|
3L
|
Power supply
|
METER 15 A fuse
|
Ignition switch is ON position.
|
B+
|
• METER 15 A fuse
• Battery
|
|
4A
|
Power supply
|
SAS 10 A fuse
|
Ignition switch is ON position.
|
B+
|
• SAS 10 A fuse
• Battery
|
|
4B
|
Power supply
(headlight leveling switch)
|
Headlight leveling switch
|
TNS switch is ON.
|
B+
|
• Related wiring harnesses
|
|
4C
|
Turn switch input (LH)
|
Turn switch
|
Turn switch at left position
|
1.0 or less
|
• Turn switch
• Related wiring harnesses
|
|
Other
|
B+
|
|
4D
|
Security light signal
|
Instrument cluster
|
Under any condition: Inspect for continuity to Instrument cluster.
|
Continuity detected
|
• Related wiring harnesses
|
|
4E
|
Turn switch input (RH)
|
Turn switch
|
Turn switch at right position
|
1.0 or less
|
• Turn switch
• Related wiring harnesses
|
|
Other
|
B+
|
|
4F
|
Horn switch input
|
Horn switch
|
Horn switch is ON
|
1.0 or less
|
• Horn switch
• Related wiring harnesses
|
|
Other
|
B+
|
|
4G
|
Hazard switch input
|
Hazard switch
|
Hazard switch is ON
|
1.0 or less
|
• Hazard switch
• Related wiring harnesses
|
|
Other
|
B+
|
|
4H
|
Vehicle speed signal output
|
• Audio unit
• Wiper switch (without auto wiper)
• Auto light-off control module
• Car-navigation unit
|
Under any condition: Inspect for continuity to related module.
|
Continuity detected
|
• Related wiring harnesses
|
|
4I
|
Rear wiper (INT) switch signal
|
Rear wiper switch
|
Rear wiper switch is INT position.
|
1.0 or less
|
• Rear wiper switch
• Related wiring harnesses
|
|
Rear wiper switch is OFF
|
B+
|
|
4J
|
CAN_L
|
-
|
Because this terminal is for communication, good/no good judgment by terminal voltage is not possible.
|
-
|
• Related wiring harnesses
|
|
4K
|
Rear wiper switch signal
|
Rear wiper switch
|
Rear wiper switch is ON position.
|
1.0 or less
|
• Rear wiper switch
• Related wiring harnesses
|
|
Rear wiper switch is OFF
|
B+
|
|
4L
|
CAN_H
|
-
|
Because this terminal is for communication, good/no good judgment by terminal voltage is not possible.
|
-
|
• Related wiring harnesses
|
|
4M
|
Door switch signal (driver-side) output
|
Instrument cluster
|
Door open (driver-side)
(Door switch on)
|
1.0 or less
|
• Door switch (driver-side)
• Related wiring harnesses
|
|
Doors closed (driver-side)
(Door switch off)
|
B+
|
|
4N
|
DLC-2
|
DLC-2
|
Under any condition: Inspect for continuity to DLC-2.
|
Continuity detected
|
• Related wiring harnesses
|
|
4O
|
Door switch signal (except driver-side) output
|
Instrument cluster
|
Door open (except driver-side)
(Door switch on)
|
1.0 or less
|
• Door switch (except driver-side)
• Related wiring harnesses
|
|
Doors closed (except driver-side)
(Door switch off)
|
B+
|
|
4P
|
Key reminder switch signal
|
• Steering lock unit (with advanced keyless system)
• Ignition switch (with keyless entry system)
|
Key inserted
|
B+
|
• Steering lock unit (with advanced keyless system)
• Ignition switch (with keyless entry system)
• Related wiring harnesses
|
|
Key removed
|
1.0 or less
|
|
5A
|
Fuel level signal 2 input
|
Fuel gauge sender unit
|
Under any condition: Inspect for continuity to fuel gauge sender unit.
|
Continuity detected
|
• Related wiring harnesses
|
|
5B
|
Fuel level signal 1 input
|
Fuel gauge sender unit
|
Under any condition: Inspect for continuity to fuel gauge sender unit.
|
Continuity detected
|
• Related wiring harnesses
|
|
5C
|
Woofer signal 1
|
Audio amplifier
|
Under any condition: Inspect for continuity to audio amplifier.
|
Continuity detected
|
• Related wiring harnesses
|
|
5D
|
Woofer signal 2
|
Audio amplifier
|
Under any condition: Inspect for continuity to audio amplifier.
|
Continuity detected
|
• Related wiring harnesses
|
|
5E
|
Woofer GND
|
GND
|
Under any condition: Inspect for continuity to GND.
|
Continuity detected
|
• Related wiring harnesses
|
|
6A
|
Door unlock control
|
Door lock actuator
|
Door lock actuator unlocking
|
1.0 or less → B+ → 1.0 or less
|
• Door lock actuator
• Related wiring harnesses
|
|
Other
|
1.0 or less
|
|
6B
|
Door lock control
|
Door lock actuator
|
Door lock actuator locking
|
1.0 or less → B+ → 1.0 or less
|
• Door lock actuator
• Related wiring harnesses
|
|
Other
|
1.0 or less
|
|
6D
|
GND
(headlight leveling switch)
|
GND
|
Under any condition: Inspect for continuity to GND.
|
Continuity detected
|
• Related wiring harnesses
|
|
6F
|
Courtesy light control
|
Courtesy light
|
Within 5 min after any door is opened.
|
1.0 or less
|
• Courtesy light
• Related wiring harnesses
|
|
5 min or more after any door is opened.
|
B+
|
|
All doors closed
|
B+
|
|
6G
|
Double lock control
|
Door lock actuator
|
Lock actuator double-locking (Transmitter LOCK button pressed twice within 5 s)
|
1.0 or less → B+ → 1.0 or less
|
• Door lock actuator
• Related wiring harnesses
|
|
Other
|
1.0 or less
|
|
6H
|
Courtesy light power supply
|
Courtesy light
|
Under any condition
|
B+
|
• Courtesy light
• Related wiring harnesses
|
|
6I
|
Power supply
|
• Position memory control module
• Rain sensor
• Power window main switch
4WD control module
|
Ignition switch is ON position.
|
B+
|
• Related wiring harnesses
|
|
6J
|
Brake signal
|
Brake switch
|
Stop light switch is ON
|
B+
|
Brake switch
|
|
Stop light switch is OFF
|
1.0 or less
|
|
7A
|
Signal GND
|
GND
|
Under any condition: Inspect for continuity to GND.
|
Continuity detected
|
• Related wiring harnesses
|
|
7B
|
Door switch signal (driver-side)
|
Door switch (driver-side)
|
Door open (driver-side)
(Door switch on)
|
1.0 or less
|
• Door switch (driver-side)
• Related wiring harnesses
|
|
Doors closed (driver-side)
(Door switch off)
|
B+
|
|
7C
|
Lock input (Driver-side door lock-link switch)
|
Driver-side door lock-link switch
|
Driver-side door locked
|
1.0 or less
|
• Driver-side door lock-link switch
• Related wiring harnesses
|
|
Driver-side door unlocked
|
5
|
|
7D
|
Door switch signal (RR)
|
Door switch (RR)
|
Door open (RR)
(Door switch on)
|
1.0 or less
|
• Door switch (RR)
• Related wiring harnesses
|
|
Doors closed (RR)
(Door switch off)
|
B+
|
|
7E
|
Unlock input (Driver-side door lock-link switch)
|
Driver-side door lock-link switch
|
Driver-side door locked
|
5
|
• Driver-side door lock-link switch
• Related wiring harnesses
|
|
Driver-side door unlocked
|
1.0 or less
|
|
7F
|
Door switch signal (passenger-side)
|
Door switch (passenger-side)
|
Door open (passenger-side)
(Door switch on)
|
1.0 or less
|
• Door switch (passenger-side)
• Related wiring harnesses
|
|
Doors closed (passenger-side)
(Door switch off)
|
B+
|
|
7G
|
Unlock input (except driver-side door lock-link switch)
|
Driver-side door lock-link switch
|
Except driver-side door locked
|
5
|
• Except driver-side door lock-link switch
• Related wiring harnesses
|
|
Except driver-side door unlocked
|
1.0 or less
|
|
7H
|
Key reminder switch signal output
|
Keyless control module (with advanced keyless system)
|
Key inserted
|
B+
|
• Related wiring harnesses
|
|
Key removed
|
1.0 or less
|
|
7I
|
Keyless control module communication
|
Keyless control module
|
Under any condition: Inspect for continuity to keyless control module.
|
Continuity detected
|
• Related wiring harnesses
|
|
7J
|
Lock/unlock input
|
Driver-side door key cylinder switch
|
At the moment key cylinder is locked
|
2.5
|
• Driver-side door key cylinder switch
• Related wiring harnesses
|
|
At the moment key cylinder is unlocked
|
1.0 or less
|
|
At the moment key cylinder is neutral position
|
5
|
|
7K
|
Intruder sensor signal
|
Intruder sensor (front)
|
Theft-deterrent system pre-arming, arming, or alarm
|
B+
|
• Intruder sensor (front)
• Related wiring harnesses
|
|
Intruder sensor detects intrusion
|
B+ → 1.0 or less → B+
|
|
Theft-deterrent system: Other
|
1.0 or less
|
|
7L
|
Intruder sensor (front) power supply
|
Intruder sensor (front)
|
Theft-deterrent system pre-arming or arming
|
B+
|
• Intruder sensor (front)
• Related wiring harnesses
|
|
Other
|
1.0 or less
|
|
7N
|
SAS control module signal
|
SAS control module
|
Under any condition: Inspect for continuity to SAS control module.
|
Continuity detected
|
• Related wiring harnesses
|
|
7O
|
Power window main switch communication
|
Power window main switch
|
Under any condition: Inspect for continuity to power window main switch.
|
Continuity detected
|
• Related wiring harnesses
|
|
7P
|
CAN_H
|
-
|
Because this terminal is for communication, good/no good judgment by terminal voltage is not possible.
|
-
|
• Related wiring harnesses
|
|
7Q
|
Position memory control module communication
|
Position memory control module
|
Under any condition: Inspect for continuity to position memory control module.
|
Continuity detected
|
• Related wiring harnesses
|
|
7R
|
CAN_L
|
-
|
Because this terminal is for communication, good/no good judgment by terminal voltage is not possible.
|
-
|
• Related wiring harnesses
|
|
7T
|
Vehicle speed signal output
|
Position memory control module
|
Under any condition: Inspect for continuity to power window main switch.
|
Continuity detected
|
• Related wiring harnesses
|
|
7U
|
Power supply
|
SAS control module
|
Ignition switch is ON position.
|
B+
|
• Related wiring harnesses
|
|
8A
|
Power GND
|
GND
|
Under any condition: Inspect for continuity to GND.
|
Continuity detected
|
• Related wiring harnesses
|
|
8B
|
Power supply
|
• Auto leveling control module
• TCM
• Back-up light switch
• Cooling fan relay
• HO2S
4WD control module
|
Ignition switch is ON position.
|
B+
|
• Related wiring harnesses
|
|
8C
|
Brake signal output
|
PCM
|
Stop light switch is ON
|
B+
|
Brake switch
|
|
Stop light switch is OFF
|
1.0 or less
|
|
8D
|
Brake signal output (MZR-CD (RF-Turbo))
|
• ABS HU/CM
• DSC HU/CM
• TCM
|
Stop light switch is ON
|
B+
|
Brake switch
|
|
Stop light switch is OFF
|
1.0 or less
|
|
8F
|
Power supply
|
• ABS HU/CM
• DSC HU/CM
|
Ignition switch is ON position.
|
B+
|
• Related wiring harnesses
|
|
8H
|
Front turn light (RH) control
|
Front turn light (RH)
|
Turn switch (RH) is ON
|
Alternates between 1.0 or less and B+
|
• Front turn light (RH)
• Related wiring harnesses
|
|
Turn switch is OFF
|
1.0 or less
|
|
8J
|
Front turn light (LH) control
|
Front turn light (LH)
|
Turn switch (LH) is ON
|
Alternates between 1.0 or less and B+
|
• Front turn light (LH)
• Related wiring harnesses
|
|
Turn switch is OFF
|
1.0 or less
|
|
8K
|
Power supply
|
HAZARD 10 A fuse
|
Under any condition
|
B+
|
• HAZARD 10 A fuse
• Battery
|
|
8L
|
Power supply
|
A/C relay
|
Ignition switch is ON position.
|
B+
|
• Related wiring harnesses
|
|
8M
|
Bonnet switch signal
|
Bonnet switch
|
Bonnet open
(Bonnet switch off)
|
B+
|
• Bonnet switch
• Related wiring harnesses
|
|
Bonnet closed
(Bonnet switch on)
|
1.0 or less
|
|
8N
|
Rear washer motor control
|
Rear washer motor
|
Rear washer switch is ON
|
1.0 or less
|
• Rear washer switch
• Rear washer motor
• Related wiring harnesses
|
|
Rear washer switch is OFF
|
B+
|
|
8P
|
Back-up switch signal input
|
• Back-up light switch (MTX)
• TR switch (ATX)
|
Shift to reverse
|
B+
|
• Back-up light switch (MTX)
• TR switch (ATX)
• Related wiring harnesses
|
|
Other
|
1.0 or less
|
|
9A
|
CAN_L
|
-
|
Because this terminal is for communication, good/no good judgment by terminal voltage is not possible.
|
-
|
• Related wiring harnesses
|
|
9B
|
Vehicle speed signal input
|
• ABS HU/CM
• DSC HU/CM
|
Under any condition: Inspect for continuity to ABS HU/CM or DSC HU/CM.
|
Continuity detected
|
• Related wiring harnesses
|
|
9C
|
CAN_L
|
-
|
Because this terminal is for communication, good/no good judgment by terminal voltage is not possible.
|
-
|
• Related wiring harnesses
|
|
9D
|
CAN_L
|
-
|
Because this terminal is for communication, good/no good judgment by terminal voltage is not possible.
|
-
|
• Related wiring harnesses
|
|
9E
|
CAN_H
|
-
|
Because this terminal is for communication, good/no good judgment by terminal voltage is not possible.
|
-
|
• Related wiring harnesses
|
|
9F
|
CAN_H
|
-
|
Because this terminal is for communication, good/no good judgment by terminal voltage is not possible.
|
-
|
• Related wiring harnesses
|
|
9G
|
CAN_H
|
-
|
Because this terminal is for communication, good/no good judgment by terminal voltage is not possible.
|
-
|
• Related wiring harnesses
|
|
9H
|
Check connector
|
Check connector
|
Under any condition: Inspect for continuity to Check connector.
|
Continuity detected
|
• Related wiring harnesses
|
|
9J
|
Horn relay control
|
Horn relay
|
Horn switch is ON
|
1.0 or less
|
• Horn relay
• Related wiring harnesses
|
|
Other
|
B+
|
|
9K
|
Power supply
(headlight leveling switch)
|
Headlight leveling switch
|
TNS switch is ON.
|
B+
|
• Related wiring harnesses
|
|
9L
|
Security light signal
|
PCM
|
Under any condition: Inspect for continuity to PCM.
|
Continuity detected
|
• Related wiring harnesses
|
