DTC 22

id0102a0033100


DTC 22	Cruise control switch (RESUME/ACCEL switch)
DETECTION CONDITION	• Resistance detected between cruise actuator connector terminal J and ground is other than approximately 2.2 kilohms.
POSSIBLE CAUSE	• Cruise actuator malfunction • Cruise control switch malfunction

Diagnostic procedure


INSPECTION		ACTION
INSPECT CRUISE CONTROL SWITCH • Inspect cruise control switch. (See CRUISE CONTROL SWITCH INSPECTION) • Is cruise control switch okay?	Yes	• Replace cruise actuator. (See CRUISE ACTUATOR REMOVAL/INSTALLATION)
	No	• Replace cruise control switch. (See CRUISE CONTROL SWITCH REMOVAL/INSTALLATION)