|
DTC |
C1125 |
Brake fluid level sensor |
|
|
DETECTION CONDITION |
• Brake fluid level remains low for 5 s or more
|
||
|
POSSIBLE CAUSE |
• Decrease in amount of brake fluid
• Malfunction of brake fluid level sensor
|
||
Diagnostic procedure
|
STEP
|
INSPECTION
|
ACTION
|
|
|---|---|---|---|
|
1
|
CHECK FOR CAN FOR DTCs
• Is any of DTC U1900 and/or U2516 has also been stored?
|
Yes
|
Follow inspection procedures for CAN system.
(See DTC U0073, U1900, U2516.)
|
|
No
|
Go to next step.
|
||
|
2
|
INSPECT BRAKE FLUID LEVEL
• Inspect brake fluid level.
• Is it okay?
|
Yes
|
Go to next step.
|
|
No
|
Add brake fluid to specified level, then go to Step 3.
|
||
|
3
|
INSPECT BRAKE FLUID LEVEL SENSOR
• Turn ignition key to OFF.
• Disconnect brake fluid level sensor connector.
• Measure resistance between brake fluid level sensor terminals.
• Is it okay?
|
Yes
|
Go to next step.
|
|
No
|
Repair brake fluid level sensor, then go to Next step.
|
||
|
4
|
VERIFY TROUBLESHOOTING COMPLETED
• Make sure to reconnected all disconnected connectors.
• Clear DTC from memory.
(See Clearing DTCs Procedures.)
• Is the same DTC present?
|
Yes
|
Replace DSC HU/CM, then go to next step.
|
|
No
|
Go to next step.
|
||
|
5
|
VERIFY AFTER REPAIR PROCEDURE
• Is there any other DTC present?
|
Yes
|
Go to applicable DTC inspection.
|
|
No
|
Troubleshooting completed.
|
||