SIGNATURE WING ILLUMINATION INSPECTION

id091800204800

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT i-stop)].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)

2.  Remove the set plate. (See SET PLATE REMOVAL/INSTALLATION.)

3.  Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION.)

4.  Apply battery voltage to signature wing illumination short cord terminal A, and connect terminal B to ground.

am6zzw00012746

5.  Verify that the signature wing illumination is turned on.

•  If the signature wing illumination does not turn on, inspect the signature wing illumination short cord. (See SIGNATURE WING ILLUMINATION SHORT CORD INSPECTION.)

―  If the signature wing illumination short cord is normal, replace the signature wing illumination. (See SIGNATURE WING ILLUMINATION REMOVAL/INSTALLATION.)