WHEEL HUB COMPONENT REMOVAL/INSTALLATION

id031200800400

Caution

•  Performing the following procedures without first removing the ABS wheel-speed sensor may possibly cause an open circuit in the wiring harness if it is pulled by mistake. Before performing the following procedures, disconnect the ABS wheel-speed sensor connector (body side) and fix the wiring harness to an appropriate place where it will not be pulled by mistake while servicing the vehicle.

1.  When working on the left side of the vehicle, disconnect the auto leveling sensor link. (See AUTO LEVELING SENSOR REMOVAL/INSTALLATION.)

2.  Remove in the order indicated in the table.

3.  Install in the reverse order of removal.

4.  Inspect the rear wheel alignment. (See REAR WHEEL ALIGNMENT.)

am6zzw00012698

1	ABS wheel-speed sensor
2	Brake hose clip
3	Brake caliper component (See Brake Caliper Component Removal Note.)
4	Disc plate
5	Bolt (wheel hub)
6	Wheel hub
7	Dust cover
8	Rear stabilizer control link lower side nut
9	Rear lower arm outer bolt (See Rear Lower Arm Outer Bolt Removal Note.)
10	Rear coil spring (See REAR COIL SPRING REMOVAL/INSTALLATION.)
11	Rear shock absorber lower bolt (Type A) (See REAR SHOCK ABSORBER REMOVAL/INSTALLATION.)
12	Rear shock absorber lower nut (Type B)
13	Stud bolt (Type B)
14	Rear lateral link outer bolt (See REAR LATERAL LINK REMOVAL/INSTALLATION.)
15	Rear trailing link installation bolt (See REAR LATERAL LINK REMOVAL/INSTALLATION.)
16	Bolt (rear upper arm outer side)
17	Hub support
18	Wheel hub bolt (See Wheel Hub Bolt Removal Note.) (See Wheel Hub Bolt Removal Note.)
19	Hub support bushing (front) (See Hub Support Bushing (Front) Removal Note.) (See Hub Support Bushing (Front) Installation Note.)
20	Hub support bushing (rear) (See Hub Support Bushing (Rear) Removal Note.) (See Hub Support Bushing (Rear) Installation Note.)

Brake Caliper Component Removal Note

1.  Remove the brake caliper component from the trailing link and suspend it out of the way using a cable.

Rear Lower Arm Outer Bolt Removal Note

1.  Support the rear lower arm using a jack.

ac5wzw00002562

2.  Remove the rear lower arm outer bolt.

Wheel Hub Bolt Removal Note

Note

•  The wheel hub bolts do not need to be removed unless they are being replaced.

1.  Remove the wheel hub bolt using a press.

ac5wzw00002563

Hub Support Bushing (Front) Removal Note

1.  Mark the hub support as shown in the figure.

ac5wzw00002564

2.  Press the rear hub support bushing (front) out using the SSTs.

ac5wzw00002565

Hub Support Bushing (Rear) Removal Note

1.  Mark the hub support as shown in the figure.

ac5wzw00002566

2.  Press the rear hub support bushing (rear) out using the SSTs.

ac5wzw00002567

Hub Support Bushing (Rear) Installation Note

1.  Align the projection of a hub support bushing with the marks placed during removal.

ac5wzw00002568

2.  Install a new hub support bushing (rear) using the SSTs.

ac5wzw00002569

Hub Support Bushing (Front) Installation Note

1.  Align the projection of a hub support bushing with the marks placed during removal.

ac5wzw00002570

2.  Install a new hub support bushing (front) using the SSTs.

ac5wzw00002571

Wheel Hub Bolt Installation Note

1.  Install the new wheel hub bolt using a press.

acxuuw00003087