CANNOT PRESET (PRESET FUNCTION DOES NOT OPERATE) [RADIO]
id0903e3016300
|
Possible DTC |
Cannot preset (preset function does not operate) |
|
|---|---|---|
|
Possible cause
|
• Audio unit malfunction
• Audio panel malfunction
|
|
Diagnostic procedure
|
STEP |
INSPECTION |
ACTION |
|
|---|---|---|---|
|
1
|
• Tune to desired station and push channel preset button 1 for about 2 seconds to store it.
• Repeat above for other stations using PRESET switch 2 to 5.
• Push channel preset switch 1 to 6 one by one.
• Are stored stations present?
|
Yes
|
Go to the next step.
|
|
No
|
Go to Step 3.
|
||
|
2
|
• Switch the ignition to off (LOCK) and then to ACC.
• Check if preset stations are stored by pushing preset switches.
• Are stations stored?
|
Yes
|
The system is normal. (Explain preset procedure to customer using Owner’s Manual)
|
|
No
|
Replace audio unit.
|
||
|
3
|
• Press the POWER/VOLUME switch to turn the audio on.
• Press the POWER/VOLUME switch and SEEK switch (up) simultaneously to launch the diagnostic assist function.
• Input the diagnostic assist code "02" using the diagnostic input screen.
• Select "ENTER".
• Push all switches and check if buzzer sounds.
• Is all switches okay?
|
Yes
|
The system is normal. (Explain preset procedure to customer using Owner’s Manual)
|
|
No
|
Replace audio unit.
|
||