SOUND JUMPS [CD PLAYER]


id0903k3016800

Possible DTC

Sound jumps

Using the M-MDS

B1188:64

Without using M-MDS (On-board diagnostic test mode)

10:Er07

Possible cause
•  Defective CD (e.g., cracked, badly bent, rough edges, scratch, dirty CD, condensation)
•  Improper audio unit installation (e.g., rattle, loose)
•  Inadequate tire pressure
•  Audio unit malfunction
Note
•  The CD may be malfunctioning if the sound jumps on the certain CD only. Inspect the CD player/changer operation using the CD known to be good.

Diagnostic procedure

STEP

INSPECTION

ACTION

1
•  Does the sound skip when pressing the SCAN button?
Yes
The system is normal. (Explain to the customer that the sound skips during SCAN.)
No
Go to the next step.
2
•   Can the disc in which the malfunction occurs be specified?
Yes
The system is normal. (Explain to the customer that the cause is a disc that is damaged or dirty on the playback side, or warped.)
No
Go to the next step.
3
•  Does the sound jump when the vehicle is stopped?
Yes
Go to Step 8.
No
Go to the next step.
4
•  Drive the vehicle.
•  Does the sound jump when driving over uneven surfaces?
Yes
Go to the next step.
No
Go to Step 8.
5
•  Is the audio unit installed securely?
Yes
Go to the next step.
No
Install the audio unit securely.
6
•  Inspect the tire pressure.
•  Is the tire pressure normal?
Yes
Replace the audio unit.
No
Go to the next step.
7
•  Adjust the tire pressure within specification.
•  Does the sound jump when driving the vehicle?
Yes
Replace the audio unit.
No
Audio system is normal. Explain repairs to the customers.
8
•  Replace the CD known to be good.
•  Does the sound jump when driving the vehicle?
Yes
Replace the audio unit.
No
Audio system is normal. Explain to the customer that the CD is malfunctioning.