ADAPTIVE FRONT LIGHTING SYSTEM (AFS) OFF SWITCH INSPECTION

id091800112500

Note

•  The AFS OFF switch is integrated with the cluster switch.

•  For the AFS OFF switch removal/installation, refer to “SWITCH PANEL REMOVAL/INSTALLATION” (See CLUSTER SWITCH REMOVAL/INSTALLATION.)

1.  Remove the cluster switch. (See CLUSTER SWITCH REMOVAL/INSTALLATION.)

2.  Verify that the resistance between cluster switch terminals B and C is as indicated in the table.

am6zzw00008022

am6zzw00008023

•  If the resistance can be verified as indicated in the table, go to the next step.

•  If not as indicated in the table, replace the cluster switch. (See CLUSTER SWITCH REMOVAL/INSTALLATION.)

3.  Apply battery positive voltage to cluster switch terminal J, and connect terminal I to ground.

am6zzw00008024

4.  Verify that the LED illuminates.

•  If the LED does not illuminate, replace the cluster switch. (See CLUSTER SWITCH REMOVAL/INSTALLATION.)