HEADLIGHT BULB REMOVAL/INSTALLATION

id091800800500

Without Discharge Headlight System

Headlight LO bulb (LH) (SKYACTIV-G 2.0, SKYACTIV-G 2.5)

1.  Turn the steering wheel to full right lock.

2.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT i-stop)].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5].)

3.  Partially peel back the mudguard (LH). (See MUDGUARD REMOVAL/INSTALLATION.)

4.  Disconnect the connector.

am6zzw00008030

5.  Rotate the headlight LO bulb in the direction of the arrow (1) shown in the figure to remove it in the direction of the arrow (2) shown in the figure.

am6zzw00011256

Caution

•  A halogen bulb generates extremely high heat when it is illuminated. If the surface of the bulb is soiled, excessive heat will build up and the life of the bulb will be shortened. When replacing the bulb, hold the metal flange, not the glass.

6.  Install in the reverse order of removal.

Headlight LO bulb (LH) (SKYACTIV-D 2.2)

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)

2.  Remove the air cleaner cover. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [SKYACTIV-D 2.2].)

3.  Remove the nut and screw.

am6zzw00009214

4.  Insert a tape-wrapped flathead screwdriver into the service hole in the position shown in the figure.

am6zzw00009215

5.  While pressing the clip tab of the relay and fuse block in the direction of the arrow (1) shown in the figure, pull the clip of the relay and fuse block in the direction of the arrow (2) to detach the clip tab of the relay and fuse block from the engine mount.

am6zzw00009216

6.  Pull out the relay and fuse block from the stud bolt and set it aside as shown in the figure.

am6zzw00009217

7.  Disconnect the connector.

am6zzw00008030

8.  Rotate the headlight LO bulb in the direction of the arrow (3) shown in the figure to remove it in the direction of the arrow (4) shown in the figure.

am6zzw00008031

Caution

•  A halogen bulb generates extremely high heat when it is illuminated. If the surface of the bulb is soiled, excessive heat will build up and the life of the bulb will be shortened. When replacing the bulb, hold the metal flange, not the glass.

9.  Install in the reverse order of removal.

Headlight LO bulb (RH) (SKYACTIV-G 2.0, SKYACTIV-G 2.5)

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT i-stop)].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5].)

2.  Disconnect the connector.

am6zzw00009218

3.  Rotate the headlight LO bulb in the direction of the arrow (1) shown in the figure to remove it in the direction of the arrow (2) shown in the figure.

am6zzw00009219

Caution

•  A halogen bulb generates extremely high heat when it is illuminated. If the surface of the bulb is soiled, excessive heat will build up and the life of the bulb will be shortened. When replacing the bulb, hold the metal flange, not the glass.

4.  Install in the reverse order of removal.

Headlight LO bulb (RH) (SKYACTIV-D 2.2)

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)

2.  Remove the washer tank bracket. (See WASHER TANK REMOVAL/INSTALLATION.)

3.  Disconnect the connector.

am6zzw00009218

4.  Rotate the headlight LO bulb in the direction of the arrow (1) shown in the figure to remove it in the direction of the arrow (2) shown in the figure.

am6zzw00009219

Caution

•  A halogen bulb generates extremely high heat when it is illuminated. If the surface of the bulb is soiled, excessive heat will build up and the life of the bulb will be shortened. When replacing the bulb, hold the metal flange, not the glass.

5.  Install in the reverse order of removal.

Headlight HI bulb (Without running light system)

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT i-stop)].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)

2.  Remove the air cleaner cover. (Headlight HI bulb (LH)) (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [SKYACTIV-D 2.2].)

3.  Remove the washer tank bracket. (Headlight HI bulb (RH)) (See WASHER TANK REMOVAL/INSTALLATION.)

4.  Disconnect the connector.

am6zzw00008278

5.  Rotate the headlight HI bulb in the direction of the arrow (1) shown in the figure and remove it in the direction of the arrow (2) shown in the figure.

am6zzw00008279

Caution

•  A halogen bulb generates extremely high heat when it is illuminated. If the surface of the bulb is soiled, excessive heat will build up and the life of the bulb will be shortened. When replacing the bulb, hold the metal flange, not the glass.

6.  Install in the reverse order of removal.

Headlight HI bulb (With running light system)

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT i-stop)].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)

2.  Remove the air cleaner cover. (Headlight HI bulb (LH)) (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [SKYACTIV-D 2.2].)

3.  Remove the washer tank bracket. (Headlight HI bulb (RH)) (See WASHER TANK REMOVAL/INSTALLATION.)

4.  Rotate the cover in the direction of the arrow (1) shown in the figure and remove it in the direction of the arrow (2) shown in the figure.

am6zzw00009220

5.  Rotate the headlight HI bulb in the direction of the arrow (3) shown in the figure to disconnect the connector.

am6zzw00011257

6.  Remove the headlight HI bulb.

Caution

•  A halogen bulb generates extremely high heat when it is illuminated. If the surface of the bulb is soiled, excessive heat will build up and the life of the bulb will be shortened. When replacing the bulb, hold the metal flange, not the glass.

7.  Install in the reverse order of removal.

With Discharge Headlight System

Warning

•  Incorrect servicing of the discharge headlights could result in electrical shock. Before servicing the discharge headlights, always refer to the service warnings. (See DISCHARGE HEADLIGHT SERVICE WARNINGS.)

Headlight HI/LO bulb

1.  Remove the discharge headlight control module. (See DISCHARGE HEADLIGHT CONTROL MODULE REMOVAL/INSTALLATION.)

2.  Move section A of the bulb retaining wire in the direction of the arrow (1) shown in the figure, pull it in the direction of the arrow (2) shown in the figure, and detach the bulb retaining wire and hook.

am6zzw00008033

3.  Remove the headlight HI/LO bulb.

am6zzw00008034

Caution

•  A discharge headlight bulb generates extremely high heat when it is illuminated. If the surface of the bulb is soiled, excessive heat will build up and the life of the bulb will be shortened. When replacing the bulb, hold the metal flange, not the glass.

4.  Install in the reverse order of removal.