CAR-NAVIGATION UNIT

id092000011500

Display-separated Type

Purpose

•  Reads the SD card data inserted into the car-navigation unit and sends the read data to the audio unit.

Function

•  The car-navigation unit has the following functions:

TomTom Home

•  By connecting the SD card to your computer at home, the map data or software can be updated by the user.

LIVE Service

•  HD traffic™

•  Safety alerts

•  Local search

•  Weather forecast

Note

•  Can be used when the TomTom Live servise is contracted.

Construction

•  The car-navigation unit is installed to the driver-side lower panel.

am6zzn00002182

•  The panel is integrated with the unit.

Terminal layout and signal

Car-navigation unit connector

Terminal		Signal
	1A	Ground
	1B	Ground
	1C	Ground
	1D	Ground
	1E	—
	1F	—
	1G	ACC
	1H	B+
	2A	USB power supply
	2B	USB data (+)
	2C	USB ground
	2D	USB data (+)

Antenna feeder connector

Terminal		Signal
	3A	RDS-TMC
	3B	GPS

Operation

•  For the car-navigation unit operation, refer to the car-navigation system. (See CAR-NAVIGATION SYSTEM.)

Fail-safe

•  Function not equipped.

Display-integrated Type

Purpose

•  The car-navigation unit reads the map data from the inserted SD card and displays maps or road guidance maps in the display. In addition, guidance and information to the destination is displayed in the display.

Function

•  The car-navigation unit has the following functions:

―  Audio function

―  Navigation function

―  Information function

―  Rear mount camera display function

―  Bluetooth function

Note

•  For details on each function, refer to the CAR-NAVIGATION SYSTEM. (See CAR-NAVIGATION SYSTEM.)

Construction

am6zzn00003023

Input/output signal table

Car-navigation unit connector

Terminal		Signal
	1A	Ground
	1B	B+
	1C	Steering switch 1
	1D	ACC
	1E	Front door speaker LH (-)
	1F	Steering switch 2
	1G	Front door speaker LH (+)
	1H	Illumination (+)
	1I	Front door speaker RH (-)
	1J	ANT (+)
	1K	Front door speaker RH (+)
	1L	AMP control (+)
	1M	Rear door speaker LH (+)
	1N	Rear door speaker RH (-)
	1O	Rear door speaker LH (-)
	1P	Rear door speaker RH (+)
	2A	Vehicle speed signal
	2B	Parking break signal
	2C	R position signal
	2D	Ground
	2E	Ground
	2F	Rear mount camera signal
	2G	Rear mount camera power supply
	2H	Rear mount camera detect
	3A	Ground
	3B	Front door speaker LH
	3C	Rear door speaker RH
	3D	Front door speaker RH
	3E	Ground
	3F	Rear door speaker LH
	3G	—
	3H	—
	3I	—
	3J	—
	3K	—
	3L	—
	3M	—
	3N	—
	3O	—
	3P	—
	3Q	—
	3R	—
	3S	—
	3T	—
	4A	REAR TV-GND
	4B	REAR NTSC
	4C	Bluetooth audio signal
	4D	Microphone ground
	4E	Microphone-SW
	4F	—
	4G	—
	4H	—
	4I	—
	4J	—
	4K	—
	4L	—
	4M	—
	4N	—
	4O	—
	4P	—
	5A	NTSC (+)
	5B	VTR GND
	5C	VTR audio signal (RH)
	5D	Audio signal ground
	5E	VTR audio signal (LH)
	5F	VTR-ON
	6A	USB power supply
	6B	USB data (+)
	6C	USB ground
	6D	USB data (-)

Switch location

am6zzn00003030

No.	Switch name	Function
1	TILT/EJECT button	•  Opens the display. •  Ejects CD (if long-pressed for 1 s or more).
2	AUDIO button	•  Switches to the audio mode. •  Switches to the display's image quality or brightness adjustment screen (if long-pressed for 1 s or more).
3	MAP button (up)	Switches to the navigation screen.
4	VOLUME button (up)	Adjusts the volume.
5	VOLUME button (down)	Adjusts the volume.

Operation

•   For the car-navigation unit operation, refer to the CAR-NAVIGATION SYSTEM. (See CAR-NAVIGATION SYSTEM.)

Fail-safe

•  If an open or short in the speaker circuit is detected, the car-navigation unit stops output to the speakers.