TRUNK LID LOCK STRIKER REMOVAL/INSTALLATION
id091400513700
1. Remove the following parts:
- (1) Trunk covering (See TRUNK COVERING REMOVAL/INSTALLATION.)
- (2) Trunk board (See TRUNK BOARD REMOVAL/INSTALLATION.)
- (3) Trunk side pocket (See TRUNK SIDE POCKET REMOVAL/INSTALLATION.)
- (4) Trunk end trim (See TRUNK END TRIM REMOVAL/INSTALLATION.)
2. Remove the bolts, then remove the trunk lid lock striker. (See Trunk Lid Lock Striker Installation Note.)
3. Install in the reverse order of removal.
Trunk Lid Lock Striker Installation Note
• Refer to [TRUNK LID ADJUSTMENT] and adjust the trunk lid lock striker so that the height difference and gap of the trunk lid is within the specification. (See
TRUNK LID ADJUSTMENT.)
