SIGNATURE WING ILLUMINATION SHORT CORD INSPECTION


id091800204700

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT i-stop)].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)

2.  Remove the set plate. (See SET PLATE REMOVAL/INSTALLATION.)

3.  Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION.)

4.  Remove the signature wing illumination short cord. (See SIGNATURE WING ILLUMINATION SHORT CORD REMOVAL/INSTALLATION.)

5.  Verify that the continuity between the signature wing illumination short cord terminals is as indicated in the table.

am6zzw00012744
am6zzw00012745

•  If not as indicated in the table, replace the signature wing illumination short cord. (See SIGNATURE WING ILLUMINATION SHORT CORD REMOVAL/INSTALLATION.)