NO.2 MIL ILLUMINATES [L8, LF, L5]

id010346800800

2

MIL ILLUMINATES

DESCRIPTION

The MIL is illuminated incorrectly.

POSSIBLE CAUSE

•  The PCM illuminates for emission-related concern (DTC is stored in PCM)

•  Instrument cluster malfunction

Note

•  If the MIL blinks at steady rate, misfire condition could possibly exist.

2	MIL ILLUMINATES
DESCRIPTION	The MIL is illuminated incorrectly.
POSSIBLE CAUSE	• The PCM illuminates for emission-related concern (DTC is stored in PCM) • Instrument cluster malfunction Note • If the MIL blinks at steady rate, misfire condition could possibly exist.

Diagnostic procedure

STEP	INSPECTION	RESULTS	ACTION
1	Connect the M-MDS to the DLC-2. Switch the ignition to ON (Engine off). Retrieve any DTCs. Are there any DTCs displayed?	Yes	DTC is displayed: • Go to appropriate the DTC inspection. (See DTC TABLE [L8, LF, L5].)
1		No	No DTC is displayed: • Inspect the instrument cluster operation. (See INSTRUMENT CLUSTER INSPECTION.)
2	• Verify test results. ― If normal, return to diagnostic index to service any additional symptoms. (See SYMPTOM DIAGNOSTIC INDEX [L8, LF, L5].) ― If malfunction remains, inspect related Service Information and perform repair or diagnosis. • If vehicle is repaired, troubleshooting completed. • If vehicle is not repaired or additional diagnostic information is not available, replace the PCM. (See PCM REMOVAL/INSTALLATION [L8, LF, L5].)