EGR VALVE POSITION SENSOR INSPECTION [MZR-CD (RF Turbo)]

id0140f1807600

Note

•  Perform the following test only when directed.

Voltage Inspection

1.  Switch the ignition to ON.

2.  Monitor the EGRP PID using the M-MDS.

3.  Start the engine and warm up the engine completely.

4.  Monitor the EGRP PID using the M-MDS at idle.

•  If not as specified, perform the “Circuit Open/Short Inspection”.

―  If not as specified, replace the EGR valve. (See EGR VALVE REMOVAL/INSTALLATION [MZR-CD (RF Turbo)].)