INPUT/TURBINE SPEED SENSOR INSPECTION [FS5A-EL]

id051721801200

Caution

•  Water or foreign objects entering the connector can cause a poor connection or corrosion. Be sure not to drop water or foreign objects on the connector when disconnecting it.

1.  Disconnect the input/turbine speed sensor connector.

(1)  Disconnect the negative battery cable.

(2)  Remove the air cleaner component. (SeeINTAKE-AIR SYSTEM REMOVAL/INSTALLATION [L8, LF, L5].)

(3)  Disconnect the input/turbine speed sensor connector.

am6zzw00001290

2.  Measure the resistance between terminals A and B.

am2zzw00001034

•  If there is any malfunction, replace the input/turbine speed sensor. (SeeINPUT/TURBINE SPEED SENSOR REMOVAL/INSTALLATION [FS5A-EL].)