DTC U0452:92 [INSTRUMENT CLUSTER]
id0902e8988200
|
DTC U0452:92 |
On request from SAS control module |
|---|---|
|
Detection Condition
|
Illumination command signal from SAS control module continues for 20 s or more
|
|
Possible Causes
|
SAS control module malfunction
|
Diagnostic Procedure
|
Step |
Inspection |
Action |
|
|---|---|---|---|
|
1
|
INSPECT SAS CONTROL MODULE FOR MALFUNCTION
• Switch the ignition to off.
• Connect the M-MDS to the DLC-2.
• Perform the DTC inspection for the SAS control module using the M-MDS.
(See DTC DISPLAY.)
• Is the DTC displayed again?
|
Yes
|
Go to the applicable DTC inspection.
(See DTC TABLE.)
|
|
No
|
Go to the next step.
|
||
|
2
|
VERIFY THAT NO OTHER DTCs ARE RECORDED
• Clear DTCs using the M-MDS.
• Perform the instrument cluster DTC inspection using the M-MDS.
• Is DTC U0452:92 displayed?
|
Yes
|
Replace the SAS control module.
|
|
No
|
DTC troubleshooting completed.
|
||