CLEARING DTC [AUDIO]

id0902f6400300

Caution

•  Before clearing the memory, be sure to enter all of the DTCs displayed in the on-board diagnostic test mode in the Audio Repair Order Form.

1.  Launch the on-board diagnostic test mode. (See STARTING PROCEDURE FOR ON-BOARD DIAGNOSTIC TEST MODE [AUDIO].)

2.  While pressing the POWER/VOLUME switch, simultaneously press the AUDIO CONT switch for 2 s or more.

With RDS (radio data system)

am6zzw00002506

Without RDS (radio data system)

am6zzw00003333

3.  To stop the on-board diagnostic test mode, ignition is switched to off.