DTC INSPECTION [AUTO LIGHT/WIPER CONTROL MODULE]

id0902j1345400

1.  Connect the M-MDS to the DLC-2.

am6zzw00001603

2.  After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

•  When using the IDS (laptop PC)

1.  Select “Self Test”.

2.  Select “Modules”.

3.  Select “LCM”.

•  When using the PDS (Pocket PC)

1.  Select “Module Tests”.

2.  Select “LCM”.

3.  Select “Self Test”.

3.  Verify the DTC according to the directions on the screen.

•  If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection.

4.  After completion of repairs, clear all DTCs stored in the auto light/wiper control module.

(See CLEARING DTC [AUTO LIGHT/WIPER CONTROL MODULE].)