WASHER FLUID-LEVEL SENSOR REMOVAL/INSTALLATION

id091900801800

1.  Disconnect the negative battery cable.

2.  Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION.)

3.  Remove the washer tank. (See WASHER TANK REMOVAL/INSTALLATION.)

4.  Remove in the order indicated in the table.

am6zzw00000394

1	Connector
2	Wiring harness (See Wiring Harness Removal Note.)
3	Washer fluid-level sensor
4	Grommet

5.  Install in the reverse order of removal.

Wiring Harness Removal Note

1.  Remove the connector B in the indicated of the arrow (2), while push the tab in the indicated of the arrow (1).

am6zzw00002231