PARKING SENSOR SWITCH INSPECTION

id092200775200

1.  Disconnect the negative battery cable.

2.  Remove the lower panel. (See LOWER PANEL REMOVAL/INSTALLATION.)

3.  Remove the parking sensor switch. (See PARKING SENSOR SWITCH REMOVAL/INSTALLATION.)

4.  Verify that the continuity between the parking sensor switch terminals is as indicated in the table.

am6zzw00003773

am6zzw00003797

•  If not as indicated in the table, replace the parking sensor switch.

5.  Apply battery voltage to parking sensor switch terminal B, and connect terminal D to ground.

6.  Verify that the LED illuminates.

•  If there is any malfunction, replace the parking sensor switch.