OIL CONTROL VALVE (OCV) REMOVAL/INSTALLATION [13B-MSP]

id0111e4119100

Warning

•  Hot engines and engine oil can cause severe burns. Turn off the engine and wait until it and the engine oil have cooled.

•  Continuous exposure to USED engine oil has caused skin cancer in laboratory mice. Protect your skin by washing with soap and water immediately after working with engine oil.

1.  Remove the engine cover. (See ENGINE COVER REMOVAL/INSTALLATION [13B-MSP].)

2.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [13B-MSP].)

3.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [13B-MSP].)

4.  Remove the air hose and air cleaner component. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [13B-MSP].)

5.  Remove the throttle body with the water hoses still connected. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [13B-MSP].)

6.  Remove the ignition coil and ignition coil bracket as a single unit. (See IGNITION COIL REMOVAL/INSTALLATION [13B-MSP].)

7.  Remove in the order indicated in the table.

8.  Install in the reverse order of removal.

ar8wzw00000730

1	Connector
2	OCV
3	O-ring