FUEL PUMP UNIT INSPECTION [13B-MSP]


id0114z2801100


Continuity Inspection

1.  Remove the engine cover. (See ENGINE COVER REMOVAL/INSTALLATION [13B-MSP].)

2.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [13B-MSP].)

3.  Disconnect the negative battery cable.

4.  Disconnect the fuel pump unit connector.

5.  Inspect for continuity between fuel pump unit connector terminals B and D.

ar8uuw00000863

•  If there is no continuity, replace the fuel pump unit. (See FUEL PUMP UNIT REMOVAL/INSTALLATION [13B-MSP].)