OIL PRESSURE SENSOR INSPECTION [13B-MSP]

id0140g1790600

1.  Turn the ignition switch to ON position.

2.  Verify that the voltage at PCM terminals 2R is within the specification.

•  If not as verified, replace the oil pressure sensor. (See OIL PRESSURE SENSOR REMOVAL/INSTALLATION [13B-MSP].)
Oil Pressure Sensor Output Voltage
0.55—1.03 V [Oil Pressure: 50—150 kPa {0.51—1.52 kgf/cm2, 7.3—21.7 psi}]