OIL PRESSURE SENSOR REMOVAL/INSTALLATION [13B-MSP]

id0140g1790400

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [13B-MSP].)

2.  Disconnect the negative battery cable.

3.  Remove the extension manifold (upper). (See INTAKE MANIFOLD REMOVAL/INSTALLATION [13B-MSP])

4.  Remove the extension manifold (lower). (See INTAKE MANIFOLD REMOVAL/INSTALLATION [13B-MSP])

5.  Disconnect the oil pressure sensor connector.

6.  Remove the oil pressure sensor.

ar8uuw00002105

7.  Install in the reverse order of removal.