NEUTRAL SWITCH INSPECTION [13B-MSP]


id0140g1800800


Continuity Inspection

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [13B-MSP].)

2.  Disconnect the negative battery cable.

3.  Remove the neutral switch. (See NEUTRAL SWITCH REMOVAL/INSTALLATION [P66M-D].)

4.  Verify that the continuity between neutral switch terminals A and B is as indicated in the table.

ar8uuw00001578

•  If there is any malfunction, replace the neutral switch. (See NEUTRAL SWITCH REMOVAL/INSTALLATION [P66M-D].)

Measurement condition

Continuity

Push the rod
No continuity
Except above
Continuity detected