KNOCK SENSOR (KS) INSPECTION [13B-MSP]

id0140g1802800


Resistance Inspection

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [13B-MSP].)

2.  Disconnect the negative battery cable.

3.  Disconnect the KS connector.

4.  Measure the resistance between KS terminals A and B.

•  If not within the specification, replace the KS. (See KNOCK SENSOR (KS) REMOVAL/INSTALLATION [13B-MSP].)
KS No.1, No.2 resistance
120—280 kilohms