 |
ar8uuw00002123
MASS AIR FLOW (MAF)/INTAKE AIR TEMPERATURE (IAT) SENSOR REMOVAL/INSTALLATION [13B-MSP]
id0140g1805500
1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [13B-MSP])
2. Disconnect the negative battery cable.
3. Remove the MAF/IAT sensor connector.
4. Remove in the order indicated in the table.
ar8uuw00002123
|
|
1
|
Screw
(See Screw Installation Note.)
|
|
2
|
MAF/IAT sensor
|
5. Install in the reverse order of removal.
MAF/IAT Sensor Installation Note
1. Before installation of the MAF/IAT sensor, replace the O-ring.
ar8uuw00002124
|
Screw Installation Note
1. After installation of the screws, verify that the MAF/IAT sensor is installed securely.
