WHEEL AND TIRE SPECIFICATION [European (L.H.D. U.K.) Specs.]

id0212008001a5

Wheel and tires

Item

Specification
Wheel
Size
17 x 7 1/2J
18 x 8J
19 x 8J
Offset
(mm {in})
50 {2.0}
47 {1.9}
Pitch circle diameter
(mm {in})
114.3 {4.50}
Material
Aluminum alloy
Tire
Size
225/50R17 94W
225/45R18 91W
225/40R19 89W
Air pressure
(kPa {(kgf/cm2), [bar], <psi>})
Front
Up to 4 persons
220 {(2.2), [2.2], <32>}
Full load
220 {(2.2), [2.2], <32>}
Rear
Up to 4 persons
220 {(2.2), [2.2], <32>}
Full load
250 {(2.6), [2.5], <36>}
270 {(2.8), [2.7], < 39>}
270 {(2.8), [2.7], < 39>}
Remaining tread
(mm {in})
1.6 {0.063} min.
Wheel and tire
Lug nut tightening torque
(N·m {kgf·m, ft·lbf})
88—118 {9.0—12.0, 65.0—87.0}
Wheel and tire runout
Radial direction
1.5 {0.059} max.
(mm {in})
Lateral direction
2.0 {0.078} max.
Wheel imbalance
(g {oz})
Adhesive-type*1: 13 {0.46} max.
Knock-type*2: 8 {0.28} max.
Adhesive-type*1: 12 {0.42} max.
Knock-type*2: 8 {0.28} max.
Adhesive-type*1: 12 {0.42} max.
Knock-type*2: 7 {0.20} max.

*1  :Total weight exceeds 160 g {5.65 oz}.
*2  :One balance weight: 60 g {2.12 oz} max. If the total weight exceeds 100 g {3.53 oz} on one side, rebalance after moving the tire around on the rim. Do not use three or more balance weights.
Caution
•  If the wheel and tire sizes are changed, the set value for the tire rotation diameter will be different, causing a discrepancy whereby the speedometer needle exceeds the allowable range. If the wheel and tire sizes are changed, perform a PCM configuration to change the tire size setting. (See PCM CONFIGURATION [13B-MSP].)

Temporary wheel and tires*

Item

Specification
Wheel
Size
17 x 4T
Offset
(mm {in})
40 {1.6}
Pitch circle diameter
(mm {in})
114.3 {4.50}
Material
Steel
Tire
Size
T125/70D17 98M
Air pressure
(kPa {(bar), <psi>})
420 {(4.2), <60>}
Wheel and tire
Wheel and tire runout
Radial direction
2.5 {0.10} max.
(mm {in})
Lateral direction
2.0 {0.08} max.
Lug nut tightening torque
(N·m {kgf·m, ft·lbf})
88—118 {9.0—12.0, 65.0—87.0}

*  :Without instant mobility system