WHEEL AND TIRE SPECIFICATION [Australian Specs.]


id0212008001b2

Wheel and tires

Item

Specification

Wheel
Size
18 x 8J
19 x 8J
Offset
(mm {in})
50 {2.0}
47 {1.9}
Pitch circle diameter
(mm {in})
114.3 {4.50}
Material
Aluminum alloy
Tire
Size
225/45R18 91W
225/40R19 89W
Air pressure
(kPa {(bar), <psi>})
220 {(2.2), <32>}
Remaining tread
(mm {in})
1.6 {0.063} min.
Wheel and tire
Lug nut tightening torque
(N·m {kgf·m, ft·lbf})
88—118 {9.0—12.0, 65.0—87.0}
Wheel and tire runout
Radial direction
1.5 {0.059} max.
(mm {in})
Lateral direction
2.0 {0.078} max.
Wheel imbalance
(g {oz})
Adhesive-type*1: 12 {0.42} max.
Knock-type*2: 8 {0.28} max.
Adhesive-type*1: 12 {0.42} max.
Knock-type*2: 7 {0.20} max.

*1  :Total weight exceeds 160 g {5.65 oz}.
*2  :One balance weight: 60 g {2.12 oz} max. If the total weight exceeds 100 g {3.53 oz} on one side, rebalance after moving the tire around on the rim. Do not use three or more balance weights.
Caution
•  If the wheel and tire sizes are changed, the set value for the tire rotation diameter will be different, causing a discrepancy whereby the speedometer needle exceeds the allowable range. If the wheel and tire sizes are changed, perform a PCM configuration to change the tire size setting. (See PCM CONFIGURATION [13B-MSP].)