NO.26 STARTER DOES NOT WORK [SJ6A-EL]

id050307803100

26

Starter does not work

DESCRIPTION

•  Starter does not work even when in P or N position.

POSSIBLE CAUSE

•  Selector lever mis-adjustment

•  Manual shaft malfunction

•  TR switch malfunction

•  TR switch mis-adjustment

•  Transmission operates in fail-safe function (Starter lock system related circuit open or short)

•  Immobilizer system operating or system malfunction.

Diagnostic procedure

STEP	INSPECTION		ACTION
1	• Inspect selector lever, TR switch and manual shaft positions. • Are these position normal?	Yes	Go to the next step.
1		No	Adjust the suspect part position.
2	• Inspect the TR switch. (See TRANSMISSION RANGE (TR) SWITCH INSPECTION [SJ6A-EL].) • Is the TR switch normal?	Yes	Go to engine system troubleshooting No.3 “WILL NOT CRANK” troubleshooting procedure.
2		No	Replace the TR switch. (See TRANSMISSION RANGE (TR) SWITCH REMOVAL/INSTALLATION [SJ6A-EL]
3	• Verify test results. ― If normal, return to the diagnostic index to service any additional symptoms. ― If malfunction remains, inspect the related Service Information and perform repair or diagnosis. • If the vehicle is repaired, troubleshooting completed. • If the vehicle is not repaired or additional diagnostic information is not available, replace the TCM.

26	Starter does not work
DESCRIPTION	• Starter does not work even when in P or N position.
POSSIBLE CAUSE	• Selector lever mis-adjustment • Manual shaft malfunction • TR switch malfunction • TR switch mis-adjustment • Transmission operates in fail-safe function (Starter lock system related circuit open or short) • Immobilizer system operating or system malfunction.