DTC B1342

id080200801100

DTC B1342

•  SAS control module (internal circuit abnormal)

DETECTION CONDITION

Warning

•  Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.

•  SAS control module configuration has not been performed.

•  Malfunction in the SAS control module internal circuit

POSSIBLE CAUSE

•  SAS control module malfunction

DTC B1342	• SAS control module (internal circuit abnormal)
DETECTION CONDITION	Warning • Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure. • SAS control module configuration has not been performed. • Malfunction in the SAS control module internal circuit
POSSIBLE CAUSE	• SAS control module malfunction

Diagnostic procedure

STEP	INSPECTION		ACTION
1	INSPECT SAS CONTROL MODULE • Using the M-MDS, perform SAS control module configuration. • Is DTC B1342 indicated?	Yes	Replace the SAS control module. (See SAS CONTROL MODULE REMOVAL/INSTALLATION.)
1		No	DTC troubleshooting completed.