FRONT FENDER PANEL REMOVAL/INSTALLATION

id091000801000

1.  Disconnect the negative battery cable.

2.  Remove the front side trun lights. (See FRONT SIDE TURN LIGHT REMOVAL/INSTALLATION.)

3.  Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION.)

4.  Remove the front combination lights. (See FRONT COMBINATION LIGHT REMOVAL/INSTALLATION.)

5.  Remove the side step molding. (See SIDE STEP MOLDING REMOVAL.) (See SIDE STEP MOLDING INSTALLATION.)

6.  Remove the mudguard.

7.  Remove in the order indicated in the table.

ar8uuw00001759

1	Fastener
2	Bolt A
3	Bolt B
4	Bolt C
5	Bolt D
6	Front fender panel

8.  Install in the reverse order of removal.