FRONT DOOR GLASS REMOVAL/INSTALLATION

id091200800400

1.  Position the front door glass so that the distance between the top of the front door glass and top of the front beltline molding is 140 mm {5.51 in}.

ar8uuw00000662

2.  Disconnect the negative battery cable.

3.  Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION.)

4.  Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION.)

5.  Remove the front door speaker. (See FRONT DOOR SPEAKER REMOVAL/INSTALLATION.)

6.  Remove the hole cover.

7.  Remove the bolts.

ar8uuw00002038

Caution

•  If you remove the bolt without supporting the front door glass, the front door glass may fall off and get damaged. Be sure to hold the front door glass by inserting your hand into the mounting hole for the front door speaker when removing the bolt.

8.  Lift the front door glass up, then remove it while tilting it in the direction of the arrow.

9.  Install in the reverse order of removal.