EXTRACTOR CHAMBER REMOVAL/INSTALLATION

id091600801500

1.  Remove the following parts:

(1)  Trunk end trim (See TRUNK END TRIM REMOVAL/INSTALLATION.)

(2)  Trunk side trim (See TRUNK SIDE TRIM REMOVAL/INSTALLATION.)

(3)  Rear combination light (See REAR COMBINATION LIGHT REMOVAL/INSTALLATION.)

(4)  Rear splash shield (See SPLASH SHIELD REMOVAL/INSTALLATION.)

(5)  Rear bumper (See REAR BUMPER REMOVAL/INSTALLATION.)

2.  Detach clips A by squeezing them from inside the vehicle, and remove the extractor chamber from the body.

ar8uuw00001941

3.  Install in the reverse order of removal.