LICENSE PLATE LIGHT REMOVAL/INSTALLATION


id091800801100

1.  Disconnect the negative battery cable.

2.  Remove the following parts:

(1)  Trunk end trim (SeeTRUNK END TRIM REMOVAL/INSTALLATION.)
(2)  Trunk side trim (SeeTRUNK SIDE TRIM REMOVAL/INSTALLATION.)
(3)  Rear combination light (SeeREAR COMBINATION LIGHT REMOVAL/INSTALLATION.)
(4)  Detach the license plate light from the rear bumper.
(5)  Rear bumper (SeeREAR BUMPER REMOVAL/INSTALLATION.)

3.  Disconnect the license plate light connector and remove the license plate light.

ar8wzw00000059

4.  Install in the reverse order of removal.