OIL PUMP REMOVAL/INSTALLATION[AJ (3.0L Duratec)]

id0111a2800600

Removal

1.  Remove the oil pan. (See OIL PAN REMOVAL/INSTALLATION[AJ (3.0L Duratec)].)

2.  Remove the timing drive component. (See TIMING CHAIN REMOVAL/INSTALLATION[AJ (3.0L Duratec)].)

3.  Remove the oil strainer. (See OIL STRAINER REMOVAL/INSTALLATION[AJ (3.0L Duratec)].)

4.  Remove the crankshaft pulley lock bolt and crankshaft sprocket.

atraaw00000432

5.  Remove the bolts in the order show in the figure and remove the oil pump.

atraaw00000433

Installation

1.  Position the oil pump, and tighten the bolts in the order indicated shown in the figure.

atraaw00000434

2.  Install the crankshaft sprocket.

atraaw00000435

3.  Install the oil strainer. (See OIL STRAINER REMOVAL/INSTALLATION[AJ (3.0L Duratec)].)

4.  Install the timing drive component. (See TIMING CHAIN REMOVAL/INSTALLATION[AJ (3.0L Duratec)].)

5.  Install the oil pan. (See OIL PAN REMOVAL/INSTALLATION[AJ (3.0L Duratec)].)

6.  Inspect the oil pressure. (See OIL PRESSURE INSPECTION[AJ (3.0L Duratec)].)