FUEL INJECTOR REMOVAL/INSTALLATION[AJ (3.0L Duratec)]


id0114a1800600

Warning
•  Fuel is very flammable liquid. If fuel spills or leaks from the pressurized fuel system, it will cause serious injury or death and facility breakage. Fuel can also irritate skin and eyes. To prevent this, always complete the "Fuel Line Safety Procedure", while referring to the "BEFORE SERVICE PRECAUTION".

1.  Disconnect the negative battery cable.

2.  Remove the fuel distributor. (See FUEL DISTRIBUTOR REMOVAL/INSTALLATION[AJ (3.0L Duratec)].)

3.  Remove the fuel injector from the fuel distributor.

atraaw00001012

4.   Apply clean engine oil to a new O-ring sealing.

atraaw00001013

5.  Install in the reverse order of removal.