IGNITION COIL REMOVAL/INSTALLATION[AJ (3.0L Duratec)]

id0118a1800200

1.  Disconnect the negative battery cable.

2.  Remove the plug hole plate.

3.  Remove the dynamic chamber. (See DYNAMIC CHAMBER REMOVAL/INSTALLATION[AJ (3.0L Duratec)].)

4.  Remove in the order indicated in the table.

Caution

•  Apply small amount of the specified dielectric grease to the inside of the ignition coils, then install the ignition coils to the spark plugs.

―  Specified grease: Motorcraft XG-3A

5.  Install in the reverse order of removal.

atraaw00003413

1	Connector
2	Ignition coil