RH FRONT DRIVE SHAFT SEAL REMOVAL[LA4AX-EL (CD4E)]

id0316a2800800

Note

•  If the transfer case is leaking ATF, install a new transfer case driven gear seal. (See TRANSFER CASE DRIVEN GEAR SEAL REMOVAL[LA4AX-EL (CD4E)].) (See TRANSFER CASE DRIVEN GEAR SEAL INSTALLATION[LA4AX-EL (CD4E)].)

1.  Remove the exhaust front pipe. (See FRONT PIPE REMOVAL/INSTALLATION[AJ (3.0L Duratec)].)

2.  Remove the bolts.

atraaw00003286

3.  Remove the heat shield.

4.  Remove the joint shaft. (See JOINT SHAFT REMOVAL/INSTALLATION[AJ (3.0L Duratec)].)

5.  Remove and discard the dust shield.

atraaw00003016

6.  If the hypoid gear lubricant is leaking from the transfer case, remove the RH front drive shaft seal.

atraaw00003017