ANTENNA FEEDER REMOVAL/INSTALLATION
id092000803900
1. Disconnect the negative battery cable.
2. Remove the meter hood. (See METER HOOD REMOVAL/INSTALLATION.)
3. Remove the instrument cluster. (See INSTRUMENT CLUSTER REMOVAL/INSTALLATION.)
4. Disconnect the pin from the defroster resistor.
atraaw00001526
|
5. Remove the A-pillar lower trim (RH).
6. Disconnect the antenna cable connector.
atraaw00001527
|
7. Remove the side panel (RH).
atraaw00001528
|
8. Disconnect the pin-type retainer from the right vent duct.
atraaw00001529
|
9. Remove the audio unit. (See AUDIO UNIT REMOVAL.)
10. Disconnect the antenna cable.
atraaw00001530
|
11. Pull the antenna cable out through the right instrument panel opening.
12. Install in the reverse order of removal.