INSTRUMENT CLUSTER REMOVAL/INSTALLATION
id092200800500
-
Caution
-
• Prior to removal of the instrument cluster, it is necessary to upload module configuration information to the M-MDS. This information needs to be downloaded into the new instrument cluster once installed. (See
INSTRUMENT CLUSTER CONFIGURATION.)
-
Caution
-
• The instrument cluster is sensitive to static electrical charges. If exposed to these charges, damage may result.
1. Remove the meter hood. (See METER HOOD REMOVAL/INSTALLATION.)
2. Loosen the tilt lever and lower the steering column.
3. Remove the screws.
4. Disconnect the electrical connectors and remove the instrument cluster.
5. Install in the reverse order of removal.
-
Caution
-
• Once the new instrument cluster is installed, it is necessary to download the module configuration information from the M-MDS into the new instrument cluster. (See
INSTRUMENT CLUSTER CONFIGURATION.)