1. Disconnect the negative battery cable.
2. Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION.)
3. Position the splash shield out of the way.
4. Position the hood latch out of the way with the cable still connected.
5. Remove in the order indicated in the table.
6. Install in the reverse order of removal.
|
1
|
Radiator bracket
|
|
2
|
Fan control module connector
|
|
3
|
Fan control module
|
|
4
|
Center support
|
|
5
|
Radiator cowling (See Radiator Cowling Removal/Installation Note.)
|
|
6
|
Main fan
|
|
7
|
Additional fan
|
|
8
|
Main fan motor
|
|
9
|
Additional fan motor
|
1. Before removing/installing the radiator, move the condenser toward the front of the vehicle to make space.