AIR CLEANER REMOVAL/INSTALLATION [YF (2.0L Zetec)]
id0113b9802500
1. Disconnect the air hose. (See AIR HOSE REMOVAL/INSTALLATION [YF (2.0L Zetec)].)
2. Disconnect the MAF sensor connector.
3. Remove the air cleaner.
4. Install in the reverse order of removal.
-
Air cleaner installation bolt tightening torque
-
8 N·m {82 kgf·cm, 71 in·lbf}
-
Air hose clamp tightening torque
-
3 N·m {31 kgf·cm, 27 in·lbf}