DUAL PROPORTIONING VALVE REMOVAL/INSTALLATION

Warning

•  Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If brake fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally, drink water and induce vomiting. Get medical attention immediately. Failure to follow these instructions may result in personal injury.

Caution

• Brake fluid will damage painted surfaces. Be careful not to spill any on painted surfaces. If brake fluid is spilled, wipe it off immediately.

1. Remove the dual proportioning valve.

(1) Disconnect the six brake pipe fittings and plug the brake lines.

(2) Remove the dual proportioning valve bolts.

2. Install in the reverse order of removal.

3. After replacement, bleed the dual proportioning valve. (See AIR BLEEDING (BRAKE SYSTEM).)