O/D OFF SWITCH REMOVAL/INSTALLATION [GF4AX-EL]

1. Disconnect the negative battery cable.

2. Remove the steering wheel. (See STEERING WHEEL (WITH INTEGRATED AIR BAG MODULE) REMOVAL/INSTALLATION.) (See STEERING WHEEL (NOT WITH INTEGRATED AIR BAG MODULE) AND COLUMN REMOVAL/INSTALLATION.)

3. Remove the column cover.

4. Remove the combination switch.

5. Disconnect the connector.

6. Remove the selector lever component.

7. Install the selector lever component.

Tightening torque

7.84-10.78 N·m {80-109 kgf·cm, 69.5-94.6 in·lbf}

8. Connect the connector.

9. Install the combination switch.

10. Install the column cover.

11. Install the steering wheel. (See STEERING WHEEL (WITH INTEGRATED AIR BAG MODULE) REMOVAL/INSTALLATION.) (See STEERING WHEEL (NOT WITH INTEGRATED AIR BAG MODULE) AND COLUMN REMOVAL/INSTALLATION.)

12. Connect the negative battery cable.