• Misalignment
• Glass panel seal
|
STEP
|
INSPECTION
|
ACTION
|
|
|---|---|---|---|
|
1
|
INSPECT GLASS PANEL SEAL
Inspect the glass panel seal for the following items:
• Looseness
• Cracks
• Pinching
• Obstruction
Is the glass panel seal normal?
|
Yes
|
Go to the next step.
|
|
No
|
Repair if necessary.
Inspect the system for normal operation.
|
||
|
2
|
INSPECT GLASS PANEL ADJUSTMENT
Turn the ignition switch to the ON position.
Open or close the glass panel.
Inspect the alignment when the glass panel closes. (See GLASS PANEL ADJUSTMENT.)
Inspect the system for normal operation.
Is the alignment normal?
|
Yes
|
If the wind noise is still present, adjust the glass panel to closer tolerance within specification. (See GLASS PANEL ADJUSTMENT.)
Inspect the system for normal operation.
|
|
No
|
Adjust the glass panel. (See GLASS PANEL ADJUSTMENT.)
Inspect the system for normal operation.
|
||